BOPP Adhesive Packing Tape Coating Machine

BOPP Adhesive Packing Tape Coating Machine is used to make the BOPP adhesive packing tape jumbo rolls.

1. 1.1 This line suit for produce OPP tapes

  1.2 Main raw materials

      1.2.1 Basic material: BOPP film

      1.2.2 Glue Type: water base glue viscosity 150-500CPS

                     Solid content: 55%

  1.3 Coating Manner:

      1.3.1 Transfer roller  Coating

1. Technical parameters

  2.1 Width of raw material: 1300mm

  2.2 Thickness of raw material: 0.023-0.060mm

  2.3 Max. unwinding OD: ￠800mm

  2.4 Max. rewinding OD: ￠800mm

2.5 Size of unwinding roller: ￠3″

2.6 Size of rewinding roller: ￠3″

2.7 Coating weight: 15-25 g/m² (after dry)

2.8 Glue type: 150-500CPS, coating weight: 40-50 g/ m²(wet)       

2.9 Coating tolerance: ≤0.003mm(after dry)

2.10 Tolerance of edge: ±3mm

2.11 Produce speed: 50-60M/min

2.12 Machine speed: 90m/min

2.13 Heating manner: by steam, max. temp.130℃

2.14 Electric power: 3￠， 380V， 50Hz

2.15 Heat source: steam 6-8 kg/ cm²

2.16 Cooling water: 2kg/cm²                                              

III. Equipment contents

Name                                          Quantity

  3.1 Frame                                             1set

  3.2 Unwinder                                          1set

  3.3 Adhesive coating machine,transfer roller coater          1set

  3.4 Drying Oven(12Mt.)                                  1set

  3.5 Cooling roller unit                                    1set

  3.7 Rewinding machine, turret interchangeable             1set

  3.8 Electric control system                               1set

  3.9 Wiring                                            1set

3.10 Ducting                                            1set